Roundline Downpipe Rainwater

A rainwater downpipe is a pipe that is used to direct rainwater away from a building, typically from roof guttering to a drainage system.

MFP Half Round Downpipe Bracket screws on to fascia board and grips gutter fittings. These are a practical, easy to install, and cost effective solution for both new build and refurbishment applications.

Downpipe connectors are used to connect two separate pieces of downpipe together, for example if your installation requires a downpipe of longer than the 2.4mtr lengths, this product can be used to connect them.

Tough, durable and lightweight for easy installation. Cost-effective solution for both new build and refurbishment applications. Suitable for all building types.

MFP Round Downpipe is easy to use and suitable for both refurbishing existing pipework and new builds.

Downpipe shoes are used at the bottom of a rainwater pipe which is not connected directly to the drainage system or a soakaway.

Two offset bends are used together to create the section generally known as a Swan Neck.

92.5 Degree Downpipe Bends are generally used instead of an offset bend where there is a deep soffit on a building or porch. The reason that these bends are 92.5 Degree and not 90 Degree is to create a slight fall to encourage a gentle flow of rainwater inside the pipe.